- NACE MR0175/ISO 15156, Petroleum and natural gas industries—Materials for use in H2S-containing environments in oil and gas production

- Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments

- Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment

- MR0176-2006 Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

- Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants.

- Methods of Validating Equivalence to ISO 8502-9 on Measurement of the Levels of Soluble Salts

- Coating Technical File in Accordance with the IMO Performance Standard for Protective Coatings

- SP0491-2012 Worksheet for the Selection of Oilfield Nonmetallic Seal Systems

- Internal Cathodic Protection Systems in Oil-Treating Vessels Internal Cathodic Protection Systems in Oil-Treating Vessels

- Recommended Practice for Prevention, Detection, and Correction of Deaerator Cracking

- Standard Format for Collection and Compilation of Data for Computerized Material Corrosion Resistance Database Input

- Coatings and Linings over Concrete for Chemical Immersion and Containment Service

- SP0502-2010 Pipeline External Corrosion Direct Assessment Methodology

- Control of Corrosion Under Thermal Insulation and Fireproofing Materials—A Systems Approach

- Handling and Proper Usage of Inhibited Oilfield Acids

- SP0285-2011 Corrosion Control of Underground Storage Tank Systems by Cathodic Protection

- Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures

- Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

- Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur ServiceRP0302-2002 Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service

- Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Storage Tanks

- SP0390-2009 (formerly RP0390), Maintenance and Rehabilitation Considerations for Corrosion Control of Atmospherically Exposed Existing Steel-Reinforced Concrete Structures

- Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection

- Sheet Rubber Linings for Abrasion and Corrosion Serviceby RP0298-98 Sheet Rubber Linings for Abrasion and Corrosion Service

- SP0403-2008 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping

- Design, Fabrication, and Inspection of Tanks for the Storage of Petroleum Refining Alkylation Unit Spent Sulfuric Acid at Ambient Temperatures

- Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

- Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors

- Internal Corrosion Direct Assessment Methodology for Liquid Petroleum Pipelines

- SP0210-2010 Pipeline External Corrosion Confirmatory Direct Assessment

- Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)

- Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures

- Format, Content, and Guidelines for Developing a Materials Selection Diagram

- SP0507-2007 External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX) Format

- Design Considerations for Corrosion Control of Reinforcing Steel in Concrete

- SP0572-2007 Design, Installation, Operation, and Maintenance of Impressed Current Deep Groundbeds

- Corrosion Control of Offshore Structures by Protective Coatings

- SP0110-2010 Wet Gas Internal Corrosion Direct Assessment Methodology for Pipelines

- SP0109-2009, Field Application of Bonded Tape Coatings for External Repair, Rehabilitation, and Weld Joints on Buried Metal Pipelines

- Control of Internal Corrosion in Steel Pipelines and Piping Systems

- Control of External Corrosion on Underground or Submerged Metallic Piping Systems

- Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control SystemsMitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems

- SP0178-2007 Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service

- Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe

- Corrosion Control of Sucker Rods by Chemical Treatment

- SP0196-2011 Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks

- RP0602-2002 Field-Applied Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

- Application of Cathodic Protection for External Surfaces of Steel Well Casings

- Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

- RP0692-2003 Application of a Coating System to Exterior Surfaces of Steel Rail Cars

- Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations

- SP0592-2006 Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Concentrated (90 to 98%) Sulfuric Acid Service

- Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes

- RP0495-2003 Guidelines for Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industries

- RP0402-2002 Field-Applied Fusion-Bonded Epoxy (FBE) Pipe Coating Systems for Girth Weld Joints: Application, Performance, and Quality Control

- SP0490-2007 Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coatings of 250 to 760 µm (10 to 30 mils)

- RP0391-2001 Materials for the Handling and Storage of Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures

- RP0394-2002 Application, Performance, and Quality Control of Plant-Applied, Fusion-Bonded Epoxy External Pipe Coating

- RP0395-99 Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

- SP0398-2006 Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors

- RP0399-2004 Plant-Applied, External Coal Tar Enamel Pipe Coating Systems: Application, Performance, and Quality Control

- Methods and Controls to Prevent In-Service Environmental Cracking of Carbon Steel Weldments in Corrosive Petroleum Refining Environments

- NACE No. 2/SSPC-SP 10 Near-White Metal Blast Cleaning

- NACE No. 3/SSPC-SP 6 Commercial Blast Cleaning

- NACE No. 4/SSPC-SP 7 Brush-Off Blast Cleaning

- SP0200-2008 Steel-Cased Pipeline Practices

- NACE No. 6/SSPC-SP 13 Surface Preparation of Concrete

- NACE No. 8/SSPC-SP 14 Industrial Blast Cleaning

- Cathodic Protection of Prestressed Concrete Cylinder Pipelines

- NACE No. 1/SSPC-SP 5 White Metal Blast Cleaning

- NACE No. 12/AWS C2.23M/SSPC-CS 23.00 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

- RP0303-2003 Field-Applied Heat-Shrinkable Sleeves for Pipelines: Application, Performance, and Quality Control

- RP0170-2004 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment

- SP0102-2010 In-Line Inspection of Pipelines

- Inspection of Linings on Steel and Concrete

- RP0304-2004 Design, Installation, and Operation of Thermoplastic Liners for Oilfield Pipelines

- Stress Corrosion Cracking (SCC) Direct Assessment Methodology

- RP0189-2002 On-Line Monitoring of Cooling Waters

- SP0191-2008 The Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

- SP0192-2012 Monitoring Corrosion in Oil and Gas Production with Iron Counts

- RP0193-2001 External Cathodic Protection of On-Grade Carbon Steel Storage Tank Bottoms

- NACE No. 10/SSPC-PA 6 Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks

- NACE No. 11/SSPC-PA 8 Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels

- SP0199-2009 Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment

- SP0286-2007 Electrical Isolation of Cathodically Protected Pipelines

- RP0287-2002 Field Measurement of Surface Profile of Abrasive Blast Cleaned Steel Surfaces Using a Replica Tape

- SP0274-2011 High-Voltage Electrical Inspection of Pipeline Coatings

- Method for Conducting Coating (Paint) Panel Evaluation Testing in Atmospheric Exposures

- Field-Applied Underground Wax Coating Systems for Underground Pipelines: Application, Performance, and Quality Control

- Application of a Coating System to Interior Surfaces of Covered Hopper Rail Cars in Plastic, Food, and Chemical Service

- Metallurgical and Inspection Requirements for Cast Sacrificial Anodes for Offshore Applications

- SP0296-2010 Guidelines for Detection, Repair, and Mitigation of Cracking of Existing Petroleum Refinery Pressure Vessels in Wet H2S Environments

- RP0297-2004 Maintenance Painting of Electrical Substation Apparatus Including Flow Coating of Transformer Radiators

- RP0292-2003 Installation of Thin Metallic Wallpaper Lining in Air Pollution Control and Other Process Equipment

- Care, Handling, and Installation of Internally Plastic-Coated Oilfield Tubular Goods and Accessories

- NACE No. 13/SSPC-ASC-1 Industrial Coating and Lining Application Specialist Qualification and Certification

- Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems

- TM0108-2012 Testing of Catalyzed Titanium Anodes for Use in Soils or Natural Waters

- Test Procedures for Organic-Based Conductive Coating Anodes for Use on Concrete Structures

- Laboratory Test

- Aboveground Survey Techniques for the Evaluation of Underground Pipeline Coating Condition

- TM0498-2006 Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture

- Immersion Corrosion Testing of Ceramic Materials

- TM0102-2002 Measurement of Protective Coating Electrical Conductance on Underground Pipelines

- Exterior Protective Coatings for Seawater Immersion Service

- Offshore Platform Ballast Water Tank Coating System Evaluation

- Offshore Platform Atmospheric and Splash Zone Maintenance Coating System Evaluation

- Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation

- TM0101-2012 Measurement Techniques Related to Criteria for CP

- TM0169-2000 Laboratory Corrosion Testing of Metals

- TM0172-2001 Determining Corrosive Properties of Cargoes in Petroleum Product Pipelines

- Methods for Determining Quality of Subsurface Injection Water Using Membrane Filters

- TM0174-2002 Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials in Immersion Service

- TM0177-2005, Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments

- Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods in an Aqueous Flowing Environment

- Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Goods by Autoclave Testing

- TM0186-2002 Holiday Detection of Internal Tubular Coatings of 250 to 760 µm (10 to 30 mils) Dry Film Thickness

- Evaluating Elastomeric Materials in Sour Gas Environments

- TM0190-2006 Impressed Current Laboratory Testing of Aluminum Alloy Anodes

- TM0192-2003 Evaluating Elastomeric Materials in Carbon Dioxide Decompression Environments

- Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures Below 93°C (200°F)

- TM0194-2004 Field Monitoring of Bacterial Growth in Oilfield Systems

- Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate and/or Strontium Sulfate from Solution

- Slow Strain Rate Test Method for Screening Corrosion-Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service

- TM0199-2006 Standard Test Method for Measuring Deposit Mass Loading (Deposit Weight Density) Values for Boiler Tubes by the Glass-Bead-Blasting Technique

- Standard Test Method for Phosphonate in Brine

- Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking

- Testing of Embeddable Impressed Current Anodes for Use in Cathodic Protection of Atmospherically Exposed Steel-Reinforced Concrete

- Evaluating Elastomeric Materials in Sour Liquid Environments

- Effects of High-Temperature, High-Pressure Carbon Dioxide Decompression on Elastomeric Materials

- Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environments

- Corrosion Control and Monitoring in Seawater Injection Systems

- Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil & Gas Prod. Systems)

- Holiday Detection of Internal Tubular Coatings of Less than 250 µm (10 mils) Dry Film Thickness

- Screening Tests for Evaluating the Effectiveness of Gypsum Scale Removers