Search Standards | Back to all Standards
- Specification for hard anodic oxidation coatings on aluminium and its alloys
- Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods
- Anodized aluminium and aluminium alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method
- Anodized aluminium and aluminium alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method
- Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates -- Rating of test specimens and manufactured articles subjected to corrosion tests
- Metallic coatings -- Review of porosity tests
- Metallic coatings -- Porosity tests -- Ferroxyl test
- Chemical conversion coatings -- Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
- Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method
- ISO 10683:2000 Fasteners -- Non-electrolytically applied zinc flake coatings
- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification
- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit
- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit
- Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot
- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling
- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution
- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness
- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density
- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure
- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter
- Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification
- ISO 11126-1:1993/Cor 1:1997
- ISO 11126-1:1993/Cor 2:1997
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide
- ISO 11126-7:1995/Cor 1:1999
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand
- Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite
- Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling
- ISO 11127-2:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution
- ISO 11127-3:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density
- ISO 11127-4:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test
- ISO 11127-5:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture
- ISO 11127-6:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement
- ISO 11127-7:2011 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides
- ISO 11408:1999 Chemical conversion coatings -- Black oxide coating on iron and steel -- Specification and test methods
- ISO 12686:1999 Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
- ISO 12687:1996 Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test
- ISO 12944-4:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 4: Types of surface and surface preparation
- ISO 14231:2000 Thermal spraying -- Acceptance inspection of thermal spraying equipment
- ISO 14232:2000 Thermal spraying -- Powders -- Composition and technical supply conditions
- ISO 1460:1992 Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area
- ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods ISO 1461:1999 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods
- Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
- ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
- ISO 14647:2000 Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test
- ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete
- Protection against corrosion of iron and steel in structures -- Zinc and aluminium coatings -- Guidelines
- ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength
- ISO 14917:1999 Thermal spraying -- Terminology, classification
- ISO 14918:1998 Thermal spraying -- Approval testing of thermal sprayers Thermal spraying -- Approval testing of thermal sprayers Thermal spraying -- Approval testing of thermal sprayers
- ISO 14919:2001 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions
- ISO 14920:1999 Thermal spraying -- Spraying and fusing of self-fluxing alloys
- ISO 14921:2010 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components
- ISO 14922-1:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use
- ISO 14922-2:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements
- ISO 14922-3:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements
- ISO 14922-4:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements
- ISO 15720:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography
- ISO 15721:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour
- ISO 15724:2001 Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method
- ISO 15730:2000 Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel
- ISO 2063:1991 Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys
- Metallic and other inorganic coatings -- Thermal spraying -- Zinc, aluminium and their alloys
- ISO 2064:1996 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness
- ISO 2080:2008 Surface treatment and metallic coatings -- General classification of terms
- ISO 2080:2008 Electroplating and related processes -- Vocabulary
- ISO 2081:2008 Metallic coatings -- Electroplated coatings of zinc on iron or steel
- ISO 2082:2008 Metallic coatings -- Electroplated coatings of cadmium on iron or steel
- ISO 2085:2010 Anodizing of aluminium and its alloys -- Check of continuity of thin anodic oxide coatings -- Copper sulphate test
- ISO 2093:1986 Electroplated coatings of tin -- Specification and test methods
- ISO 2106:2011 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxide coatings -- Gravimetric method
- ISO 2106:2011
- ISO 2135:2010 Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
- ISO 2143:2010 Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxide coatings after sealing -- Dye spot test with prior acid treatment
- ISO 2177:2003 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
- ISO 2178:1982 Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method
- ISO 2179:1986 Electroplated coatings of tin-nickel alloy -- Specification and test methods
- ISO 2360:2003 Non-conductive coatings on non-magnetic basis metals -- Measurement of coating thickness -- Eddy current method
- ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method
- ISO 2376:2010 Anodization (anodic oxidation) of aluminium and its alloys -- Insulation check by measurement of breakdown potential
- ISO 27874:2008 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 4: Determination of gold content
- ISO 27874:2008 Metallic coatings -- Electrodeposited gold and gold alloy coatings for engineering purposes
- ISO 27874:2008 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 1: Determination of coating thickness
- ISO 2819:1980 Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -- Review of methods available for testing adhesion
- ISO 2931:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance
- ISO 3210:2010 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
- ISO 3211:2010 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxide coatings to cracking by deformation
- ISO 3497:2000 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods
- ISO 3543:2000 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method
- ISO 3613:2010 Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods
- ISO 3861:2005 Rubber hoses for sand and grit blasting -- Specification
- ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method
- ISO 3882:1986 Metallic and other non-organic coatings -- Review of methods of measurement of thickness
- ISO 3882:2003 Metallic and other non-organic coatings -- Review of methods of measurement of thickness
- ISO 3892:2000 Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods
- ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests
- ISO 4518:1980 Metallic coatings -- Measurement of coating thickness -- Profilometric method
- ISO 4519:1980 Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes
- ISO 4520:1981 Chromate conversion coatings on electroplated zinc and cadmium coatings
- ISO 4521:2008 Metallic coatings -- Electrodeposited silver and silver alloy coatings for engineering purposes
- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 1: Determination of coating thickness
- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 2: Adhesion tests
- ISO 4521:2008 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 3: Determination of the presence of residual salts
- ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Environmental tests
- ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests
- ISO 4524-3:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 3: Electrographic tests for porosity
- ISO 4524-6:1988 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 6: Determination of the presence of residual salts
- ISO 4526:2004 Metallic coatings -- Electroplated coatings of nickel for engineering purposes
- Autocatalytic nickel-phosphorus coatings -- Specification and test methods
- ISO 4536:1985 Metallic and non-organic coatings on metallic substrates -- Saline droplets corrosion test (SD test)
- ISO 4538:1978 Metallic coatings -- Thioacetamide corrosion test (TAA test)
- ISO 4539:1980 Electrodeposited chromium coatings -- Electrolytic corrosion testing (EC test)
- ISO 4541:1978 Metallic and other non-organic coatings -- Corrodkote corrosion test (CORR test)
- ISO 4543:1981 Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions
- ISO 4543:1981 Metallic and other non-organic coatings -- General rules for corrosion tests applicable for storage conditions
- Paints and varnishes -- Terms and definitions for coating materials -- Part 3: Surface preparation and methods of application
- Anodizing of aluminium and its alloys -- Determination of the fastness to ultra-violet light of coloured anodic oxide coatings
- ISO 6719:2010 Anodized aluminium and aluminium alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
- ISO 6988:1985 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture
- ISO 7583:1986 Anodizing of aluminium and its alloys -- Vocabulary
- ISO 7587:1986 Electroplated coatings of tin-lead alloys -- Specification and test methods
- ISO 7599:2010 Anodizing of aluminium and its alloys -- General specifications for anodic oxide coatings on aluminium
- ISO 7668:2010 Anodized aluminium and aluminium alloys -- Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
- ISO 7759:2010 Anodizing of aluminium and its alloys -- Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
- ISO 7989:2006 Zinc coatings for steel wire
- ISO 8251:2011 Anodized aluminium and aluminium alloys -- Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus
- ISO 8251:2011 Anodized aluminium and aluminium alloys -- Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus
- ISO 8401:1986 Metallic coatings -- Review of methods of measurement of ductility
- ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades………..
- ISO 8501-1:2007 Representative photographic examples of the change of appearance imparted to steel when blast-cleaned with different abrasives
- ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coat
- ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, cut edges and other areas with surface imperfections
- ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces
- ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method
- ISO 8502-4:1993 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application
- ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method
- ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method
- ISO 8502-8:2001 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 8: Field method for the refractometric determination of moisture
- ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts
- ISO 8503-1:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators……..
- ISO 8503-2:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned st
- ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for
- ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles
- ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning
- ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning
- ISO 8993:2010 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Chart method
- ISO 8994:2011 Anodized aluminium and aluminium alloys -- Rating system for the evaluation of pitting corrosion -- Grid method
- ISO 9220:1988 Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method
- ISO 9587:2007 Metallic and other inorganic coatings -- Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement
- Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement
- ISO 9717:2010 Phosphate conversion coatings for metals -- Method of specifying requirements
- ISO/TR 11728:1993 Anodized aluminium and aluminium alloys -- Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas
- ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination
- ISO/TR 8125:1984 Anodizing of aluminium and its alloys -- Determination of colour and colour difference of coloured anodic coatings
(Back to all Standards)
