Search Standards | Back to all Standards
- Corrosion protection of steel structures by protective paint systems -- Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating -- Part 1: Pull-off testing
- Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
- Binders for paints and varnishes -- Determination of monomeric diisocyanates in polyisocyanate resins
- Micaceous iron oxide pigments for paints -- Specifications and test methods
- ISO 11341:2004 Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation
- ISO 11402:2004 Binders for paints and varnishes -- Determination of free-formaldehyde content of amino resins -- Sodium sulfite titrimetric method
- ISO 11503:1995 Paints and varnishes -- Determination of resistance to humidity (intermittent condensation)
- ISO 11507:2007 Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV and water
- ISO 11668:1997 Binders for paints and varnishes -- Chlorinated polymerization resins -- General methods of test
- ISO 11890-1:2007 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method
- ISO 11908:1996 Binders for paints and varnishes -- Amino resins -- General methods of test
- ISO 11909:2007 Binders for paints and varnishes -- Polyisocyanate resins -- General methods of test
- ISO 11997-1:2005
- ISO 11997-1:2005 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity
- ISO 11997-2:2000 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light
- ISO 11998:2006 Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings
- ISO 12137:2011
- ISO 12137-1:2011 Paints and varnishes -- Determination of mar resistance -- Part 1: Method using a curved stylus
- ISO 1247:1974 Aluminium pigments for paints
- ISO 1247:1974/Amd 1:1982
- ISO 1248:2006 Iron oxide pigments for paints
- ISO 1249:1974 Zinc chromate pigments -- Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
- ISO 1249:1974/Cor 1:1992
- ISO 12944-1:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 1: General introduction
- ISO 12944-2:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 2: Classification of environments
- ISO 12944-3:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 3: Design considerations
- ISO 12944-5:2007 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 5: Protective paint systems
- ISO 12944-6:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 6: Laboratory performance test methods
- ISO 12944-7:1998 Paints and varnishes -- Corrosion protection of steel structures ISO 12944-7:1988 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 7: Execution and supervision of paint work
- ISO 12944-8:1998 Paints and varnishes -- Corrosion protection of steel structures by protective paint systems -- Part 8: Development of specifications for new work and maintenance
- ISO 13803:2000 Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees
- ISO 13885-1:2008 Binders for paints and varnishes -- Gel permeation chromatography (GPC) -- Part 1: Tetrahydrofuran (THF) as eluent
- ISO 14446:1999 Binders for paints and varnishes -- Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
- ISO 14680-1:2000 ISO Paints and varnishes -- Determination of pigment content -- Part 1: Centrifuge method
- ISO 14680-2:2000 Paints and varnishes -- Determination of pigment content -- Part 2: Ashing method
- ISO 14680-3:2000 Paints and varnishes -- Determination of pigment content -- Part 3: Filtration method
- ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes -- Specifications and methods of test
- ISO 1513:2010 Paints and varnishes -- Examination and preparation of samples for testing
- ISO 1513:2010
- ISO 1514:2004 Paints and varnishes -- Standard panels for testing
- ISO 1516:2002 Determination of flash/no flash -- Closed cup equilibrium method
- ISO 1518-1:2011 Paints and varnishes -- Scratch test
- ISO 15181-1:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides
- ISO 15181-2:2007 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
- ISO 1518-2:2011 Paints and varnishes -- Determination of mar resistance -- Part 2: Method using a pointed stylus
- ISO 15184:1998 Paints and varnishes -- Determination of film hardness by pencil test
- ISO 1519:2011 Paints and varnishes -- Bend test (cylindrical mandrel)
- ISO 1520:2006 Paints and varnishes -- Cupping test
- ISO 1522:2006 Paints and varnishes -- Pendulum damping test
- ISO 1522:2006
- ISO 1523:2002 Determination of flash point -- Closed cup equilibrium method
- ISO 15234:1999 Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -- Determination of the steady-state concentration of formaldehyde in a small test chamber
- ISO 1524:2000 Paints, varnishes and printing inks -- Determination of fineness of grind Paints, varnishes and printing inks -- Determination of fineness of grind
- ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes -- Sampling
- ISO 15710:2002 Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution
- ISO 15741:2001 Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
- ISO 15880:2000 Paints, varnishes and binders -- Determination of MEQ value of water-based coating materials and binders
- ISO 2040:1972 Strontium chromate pigments for paints
- ISO 2068:1972 Barium chromate pigments for paints
- ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) -- Determination of partial acid value and total acid value
- ISO 2409:2007 Paints and varnishes -- Cross-cut test
- ISO 2431:2011
- ISO 2431:2011 Paints and varnishes -- Determination of flow time by use of flow cups
- ISO 2495:1995 Iron blue pigments -- Specifications and methods of test
- ISO 277:2002 Binders for paints and varnishes -- Raw tung oil -- Requirements and methods of test
- ISO 2808:2007 Paints and varnishes -- Determination of film thickness
- ISO 2810:2004 Paints and varnishes -- Notes for guidance on the conduct of natural weathering tests
- ISO 2811-1:2011 Paints and varnishes -- Determination of density -- Part 1: Pyknometer method
- ISO 2811-2:2011 Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method
- ISO 2811-3:2011 Paints and varnishes -- Determination of density -- Part 3: Oscillation method
- ISO 2811-4:2011 Paints and varnishes -- Determination of density -- Part 4: Pressure cup methodISO 2811-4:1997
- ISO 2812-1:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 1: General methods
- ISO 2812-2:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method
- ISO 2813:1994 Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees
- ISO 2813:1994/Cor 1:1997
- ISO 2814:1973 Paints and varnishes -- Comparison of contrast ratio (hiding power) of paints of the same type and colour
- ISO 2815:2003 Paints and varnishes -- Buchholz indentation test
- ISO 2884-1:1999 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-and-plate viscometer operated at a high rate of shear
- ISO 3231:1993 Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide
- ISO 3233:1998 Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
- ISO 3233:1998/Cor 1:1999
- ISO 3248:1998 Paints and varnishes -- Determination of the effect of heat
- ISO 3262-1:1997 Extenders for paints -- Specifications and methods of test -- Part 1: Introduction and general test methods
- ISO 3262-10:2000 Extenders for paints -- Specifications and methods of test -- Part 10: Natural talc/chlorite in lamellar form
- ISO 3262-11:2000 Extenders for paints -- Specifications and methods of test -- Part 11: Natural talc, in lamellar form, containing carbonates
- ISO 3262-12:2001 Extenders for paints -- Specifications and methods of test -- Part 12: Muscovite-type mica
- ISO 3262-13:1997 Extenders for paints -- Specifications and methods of test -- Part 13: Natural quartz (ground)
- ISO 3262-14:2000 Extenders for paints -- Specifications and methods of test -- Part 14: Cristobalite
- ISO 3262-15:2000 Extenders for paints -- Specifications and methods of test -- Part 15: Vitreous silica
- ISO 3262-16:2000 Extenders for paints -- Specifications and methods of test -- Part 16: Aluminium hydroxides
- ISO 3262-17:2000 Extenders for paints -- Specifications and methods of test -- Part 17: Precipitated calcium silicate
- ISO 3262-18:2000 Extenders for paints -- Specifications and methods of test -- Part 18: Precipitated sodium aluminium silicate
- ISO 3262-19:2000 Extenders for paints -- Specifications and methods of test -- Part 19: Precipitated silica
- ISO 3262-2:1998 Extenders for paints -- Specifications and methods of test -- Part 2: Barytes (natural barium sulfate)
- ISO 3262-20:2000 Extenders for paints -- Specifications and methods of test -- Part 20: Fumed silica
- ISO 3262-21:2000 Extenders for paints -- Specifications and methods of test -- Part 21: Silica sand (unground natural quartz)
- ISO 3262-22:2001 Extenders for paints -- Specifications and methods of test -- Part 22: Flux-calcined kieselguhr
- ISO 3262-3:1998 Extenders for paints -- Specifications and methods of test -- Part 3: Blanc fixe
- ISO 3262-4:1998 Extenders for paints -- Specifications and methods of test -- Part 4: Whiting
- ISO 3262-5:1998 Extenders for paints -- Specifications and methods of test -- Part 5: Natural crystalline calcium carbonate
- ISO 3262-6:1998 Extenders for paints -- Specifications and methods of test -- Part 6: Precipitated calcium carbonate
- ISO 3262-7:1998 Extenders for paints -- Specifications and methods of test -- Part 7: Dolomite
- ISO 3262-8:1999 Extenders for paints -- Specifications and methods of test -- Part 8: Natural clay
- ISO 3262-9:1997 Extenders for paints -- Specifications and methods of test -- Part 9: Calcined clay
- ISO 3270:1984 Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing
- ISO 3549:1995 Zinc dust pigments for paints -- Specifications and test methods
- ISO 3668:1998 Paints and varnishes -- Visual comparison of the colour of paints
- ISO 3679:2004 Paints, varnishes, petroleum and related products -- Determination of flashpoint -- Rapid equilibrium method
- ISO 3680:2004 Paints, varnishes, petroleum and related products -- Flash/no flash test -- Rapid equilibrium method
- ISO 3681:1996 Binders for paints and varnishes -- Determination of saponification value -- Titrimetric method
- ISO 3711:1990 Lead chromate pigments and lead chromate-molybdate pigments -- Specifications and methods of test
- ISO 3856-1:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 1: Determination of lead content -- Flame atomic absorption spectrometric method and dithizone spectrophotometric method
- ISO 3856-2:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 2: Determination of antimony content -- Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method
- ISO 3856-3:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method
- ISO 3856-4:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 4: Determination of cadmium content -- Flame atomic absorption spectrometric method and polarographic method
- ISO 3856-5:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -- Diphenylcarbazide spectrophotometric me
- ISO 3856-6:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 6: Determination of total chromium content of the liquid portion of the paint -- Flame atomic absorption spectrometric method
- ISO 3856-7:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints -- Flameless atomic absorption spect
- ISO 4618:2006 Paints and varnishes -- Terms and definitions for coating materials -- Part 1: General terms
- ISO 4618:2006 Paints and varnishes -- Terms and definitions for coating materials -- Part 2: Special terms relating to paint characteristics and properties
- ISO 4618:2006 Paints and varnishes -- Terms and definitions for coating materials -- Part 3: Surface preparation and methods of application
- ISO 4619:1998 Driers for paints and varnishes
- ISO 4620:1986 Cadmium pigments -- Specifications and methods of test
- ISO 4621:1986 Chrome oxide green pigments -- Specifications and methods of test
- ISO 4623-1:2000 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates
- ISO 4624:2002 Paints and varnishes -- Pull-off test for adhesion
- ISO 4625-1:2004 Binders for paints and varnishes -- Determination of softening point -- Ring-and-ball method
- ISO 4626:1980 Volatile organic liquids -- Determination of boiling range of organic solvents used as raw materials
- ISO 4628-1:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 1: General principles and rating schemes
- ISO 4628-2:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 2: Designation of degree of blistering
- ISO 4628-3:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 3: Designation of degree of rusting
- ISO 4628-4:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 4: Designation of degreee of cracking
- ISO 4628-5:2003 Paints and varnishes -- Evaluation of degradation of paint coatings -- Designation of intensity, quantity and size of common types of defect -- Part 5: Designation of degree of flaking
- ISO 4629:1996 Binders for paints and varnishes -- Determination of hydroxyl value -- Titrimetric method
- ISO 4630-1:2004 Binders for paints and varnishes -- Estimation of colour of clear liquids by the Gardner colour scale
- ISO 473:1982 Lithopone pigments for paints -- Specifications and methods of test
- ISO 510:1977 Red lead for paints
- ISO 591-1:2000 Titanium dioxide pigments for paints -- Part 1: Specifications and methods of test
- ISO 6270-1:1998 Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation
- ISO 6271-1:2004 Clear liquids -- Estimation of colour by the platinum-cobalt scale
- ISO 6272-1:2011 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter
- ISO 6272-2:2011 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter
- ISO 6503:1984 Paints and varnishes -- Determination of total lead -- Flame atomic absorption spectrometric method
- ISO 6504-1:1983 Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk method for white and light-coloured paints
- ISO 6504-3:2006 Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate
- ISO 6713:1984 Paints and varnishes -- Preparation of acid extracts from paints in liquid or powder form
- ISO 6744-1:1999 Binders for paints and varnishes -- Alkyd resins -- Part 1: General methods of test
- ISO 6744-2:1999 Binders for paints and varnishes -- Alkyd resins -- Part 2: Determination of phthalic anhydride content
- ISO 6744-3:1999 Binders for paints and varnishes -- Alkyd resins -- Part 3: Determination of unsaponifiable matter content
- ISO 6744-4:1999 Binders for paints and varnishes -- Alkyd resins -- Part 4: Determination of fatty acid content
- ISO 6745:1990 Zinc phosphate pigments for paints -- Specifications and methods of test
- ISO 6860:2006 Paints and varnishes -- Bend test (conical mandrel)
- ISO 7142:2007 Binders for paints and varnishes -- Epoxy resins -- General methods of test
- ISO 7143:2007 Paints, varnishes and binders -- Methods of test for characterizing water-based coating materials and binders
- ISO 7252:1984 Paints and varnishes -- Determination of total mercury -- Flameless atomic absorption spectrometric method
- Dyestuffs -- Determination of solubility in organic solvents -- Gravimetric method
- ISO 7724-1:1984 Paints and varnishes -- Colorimetry -- Part 1: Principles
- ISO 7724-2:1984 Paints and varnishes -- Colorimetry -- Part 2: Colour measurement
- ISO 7724-3:1984 Paints and varnishes -- Colorimetry -- Part 3: Calculation of colour differences
- Paints and varnishes -- Determination of water-vapour transmission rate -- Part 1: Dish method for free films
- ISO 7783:2011 Paints and varnishes -- Coating materials and coating systems for exterior masonry and concrete -- Part 2: Determination and classification of water-vapour transmission rate (permeability)
- ISO 7783:2011
- ISO 7784-1:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Rotating abrasive-paper-covered wheel method
- ISO 7784-2:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method
- ISO 7784-3:2000 Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method
- ISO 787-1:1982 General methods of test for pigments and extenders -- Part 1: Comparison of colour of pigments
- ISO 787-10:1993 General methods of test for pigments and extenders -- Part 10: Determination of density -- Pyknometer method
- ISO 787-11:1981 General methods of test for pigments and extenders -- Part 11: Determination of tamped volume and apparent density after tamping
- ISO 787-13:2002 General methods of test for pigments and extenders -- Part 13: Determination of water-soluble sulfates, chlorides and nitrates
- ISO 787-14:2002 General methods of test for pigments and extenders -- Part 14: Determination of resistivity of aqueous extract
- ISO 787-15:1986 General methods of test for pigments and extenders -- Part 15: Comparison of resistance to light of coloured pigments of similar types
- ISO 787-16:1986 General methods of test for pigments and extenders -- Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments -- Visual comparison method
- ISO 787-17:2002 General methods of test for pigments and extenders -- Part 17: Comparison of lightening power of white pigments
- ISO 787-18:1983 General methods of test for pigments and extenders -- Part 18: Determination of residue on sieve -- Mechanical flushing procedure
- ISO 787-19:1974 General methods of test for pigments -- Part 19: Determination of water-soluble nitrates (Salicylic acid method)
- ISO 787-2:1981 General methods of test for pigments and extenders -- Part 2: Determination of matter volatile at 105 degrees C
- ISO 787-21:1979 General methods of test for pigments and extenders -- Part 21: Comparison of heat stability of pigments using a stoving medium
- ISO 787-22:1980 General methods of test for pigments and extenders -- Part 22: Comparison of resistance to bleeding of pigments
- ISO 787-23:1979 ISO 787-23:1979
- ISO 787-24:1985 General methods of test for pigments and extenders -- Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments -- Photometric methods
- ISO 787-25:1993 General methods of test for pigments and extenders -- Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments -- Colorimetric method
- ISO 787-3:2000 General methods of test for pigments and extenders -- Part 3: Determination of matter soluble in water -- Hot extraction method
- ISO 787-4:1981 General methods of test for pigments and extenders -- Part 4: Determination of acidity or alkalinity of the aqueous extract
- ISO 787-5:1980 General methods of test for pigments and extenders -- Part 5: Determination of oil absorption value
- ISO 787-7:2009 General methods of test for pigments and extenders -- Part 7: Determination of residue on sieve -- Water method -- Manual procedure
- ISO 787-8:2000 General methods of test for pigments and extenders -- Part 8: Determination of matter soluble in water -- Cold extraction method
- ISO 787-9:1981 General methods of test for pigments and extenders -- Part 9: Determination of pH value of an aqueous suspension
- ISO 788:1974 Ultramarine pigments for paints
- ISO 80128:1999 Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification
- ISO 8130-1:1992 Coating powders -- Part 1: Determination of particle size distribution by sieving
- ISO 8130-10:1998 Coating powders -- Part 10: Determination of deposition efficiency
- ISO 8130-11:1997 Coating powders -- Part 11: Inclined-plane flow test
- ISO 8130-12:1998 Coating powders -- Part 12: Determination of compatibility
- ISO 8130-13:2001 Coating powders -- Part 13: Particle size analysis by laser diffraction
- ISO 8130-2:1992 Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method)
- ISO 8130-3:1992 Coating powders -- Part 3: Determination of density by liquid displacement pyknometer
- ISO 8130-4:1992 Coating powders -- Part 4: Calculation of lower explosion limit
- ISO 8130-4:1992/Cor 1:1993
- ISO 8130-5:1992 Coating powders -- Part 5: Determination of flow properties of a powder/air mixture
- ISO 8130-6:1992 Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature
- ISO 8130-6:1992/Amd 1:1998
- ISO 8130-7:1992 Coating powders -- Part 7: Determination of loss of mass on stoving
- ISO 8130-8:1994 Coating powders -- Part 8: Assessment of the storage stability of thermosetting powders
- ISO 8130-9:1992 Coating powders -- Part 9: Sampling
- ISO 8623:1997 Tall-oil fatty acids for paints and varnishes -- Specifications and test methods
- ISO 8780-1:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 1: Introduction
- ISO 8780-2:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 2: Dispersion using an oscillatory shaking machine
- ISO 8780-3:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 3: Dispersion using a high-speed impeller mill
- ISO 8780-4:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 4: Dispersion using a bead mill
- ISO 8780-5:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 5: Dispersion using an automatic muller
- ISO 8780-6:1990 Pigments and extenders -- Methods of dispersion for assessment of dispersion characteristics -- Part 6: Dispersion using a triple-roll mill
- ISO 8781-1:1990 Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 1: Assessment from the change in tinting strength of coloured pigments
- ISO 8781-2:1990 Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 2: Assessment from the change in fineness of grind
- ISO 8781-3:1990 Pigments and extenders -- Methods of assessment of dispersion characteristics -- Part 3: Assessment from the change in gloss
- ISO 9117-1:2009 Paints and varnishes -- Determination of through-dry state and through-dry time -- Method of test
- ISO 9117-2:2010 Paints and varnishes -- Pressure test for stac
- ISO 9117-3:2010 Paints and varnishes -- Surface-drying test -- Ballotini method
- Paints and varnishes -- Print-free test
- ISO 9514:2005 Paints and varnishes -- Determination of the pot-life of liquid systems -- Preparation and conditioning of samples and guidelines for testing
- ISO/TR 9038:2002 Paints and varnishes -- Determination of the ability of liquid paints to sustain combustion
(Back to all Standards)
