Search Standards | Back to all Standards
- Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
- Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip
- Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
- Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
- Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
- Standard Terminology Relating to Metallic Coated Steel Products
- Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
- Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates
- Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique
- Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
- Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings
- Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
- Standard Specification for Electrodeposited Coatings of Cadmium
- Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
- Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process
- Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
- Standard Test Methods for Electrical Conductivity and Resistivity of Water
- Standard Specification for Methyl Isobutyl Ketone
- Standard Test Method for Roundness of Glass Spheres
- Standard Specification for Raw Tung Oil
- Standard Test Method for Viscosity by Ford Viscosity Cup
- Standard Test Methods for Common Properties of Certain Pigments
- Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
- Standard Specification for Spirits of Turpentine
- Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
- Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
- Standard Guide for Testing Varnishes
- Standard Terminology for Paint, Related Coatings, Materials, and Applications
- Standard Test Methods for Water Vapor Transmission of Organic Coating Films
- Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
- Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
- Standard Test Methods for Coarse Particles in Pigments
- Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
- Standard Specification for Lampblack Pigment
- Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
- Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces
- Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
- Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints
- Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
- Standard Test Method for Volatile Content of Coatings
- Standard Test Method for Tensile Properties of Organic Coatings
- Standard Test Method for Pigment Content of Solvent-Reducible Paints
- Standard Test Methods for Evaluating Coatings For High Temperature Service
- Standard Test Methods for Scrub Resistance of Wall Paints
- Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
- Standard Specification for Chrome Oxide Green Pigment
- Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
- Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
- Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
- Standard Test Method for Hiding Power of Paints by Reflectometry
- Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
- Standard Test Method for Chipping Resistance of Coatings
- Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
- Standard Guide for Painting Inspectors (Metal Substrates)
- Standard Test Methods for Analysis of White Zinc Pigments
- Standard Specification for 2-Ethoxyethanol
- Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
- Standard Test Methods for Measuring Adhesion by Tape Test
- Standard Test Method for Film Hardness by Pencil Test
- Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
- Standard Test Method for Washability Properties of Interior Architectural Coatings
- Standard Test Method for Detection of Lead in Paint and Dried Paint Films
- Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
- Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
- Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
- Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
- Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
- Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
- Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
- Standard Specification for Standard Environment for Conditioning and Testing Paint, Varnish, Lacquer, and Related Materials
- Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
- Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
- Standard Practice for Selection of Coating Specimens for Appearance Measurements
- Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
- Standard Test Method for Leveling of Paints by Draw-Down Method
- Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
- Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
- Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
- Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
- Standard Practice for Surface Cleaning Concrete for Coating
- Standard Practice for Abrading Concrete
- Standard Practice for Liquid and Gelled Acid Etching of Concrete
- Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfac
- Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
- Standard Practice for Measurement of Wet Film Thickness by Notch Gages
- Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
- Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
- Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
- Standard Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
- Standard Classification for Dry Pigmentary Titanium Dioxide Products
- Standard Specification for Zinc Yellow (Zinc Chromate) Pigments
- Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
- Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
- Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
- Standard Test Method for Comparison of the Brush Drag of Latex Paints
- Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
- Standard Practice for Field Identification of Coatings
- Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
- Standard Practice for Preparation of Paint Brushes for Evaluation
- Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
- Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
- Standard Guide to Testing Solvent-Borne Architectural Coatings
- Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
- Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
- Standard Specification for Zinc Dust Pigment
- Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
- Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
- Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
- Standard Test Method for Specular Gloss
- Standard Guide for Testing Water-Borne Architectural Coatings
- Standard Test Method for Color Development in Tinted Latex Paints
- Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
- Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
- Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
- Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
- Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
- Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
- Standard Specification for Carbon Black Pigment for Paint
- Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
- Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
- Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- Standard Test Method for Evaluation of Cleanability of Paint Brushes
- Standard Specification for Liquid Paint Driers
- Standard Specification for Barium Sulfate Pigments
- Standard Specification for Diatomaceous Silica Pigment
- Standard Specification for Magnesium Silicate Pigment (Talc)
- Standard Specification for Wet Ground Mica Pigments
- Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
- Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
- Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage
- Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
- Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
- Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
- Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
- Standard Guide for Testing Industrial Protective Coatings
- Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings
- Standard Test Method for Evaluating Degree of Checking of Exterior Paints
- Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
- Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
- Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
- Standard Test Method for Determining the Hiding Power of Paint by Visual Evaluation of Spray Applied Coatings
- Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
- Standard Practice for Measuring Curl in Paint Brush Filling Material
- Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
- Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
- Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
- Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
- D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
- Standard Test Method for Evaluating Degree of Blistering of Paints
- Standard Test Methods for Analysis of Barium Sulfate Pigment
- Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
- Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
- Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight
- Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
- Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
- Standard Test Method for Open Time of Latex Paints
- Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
- Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
- Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
- Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
- Standard Terminology for Paint Brush Application Tools
- Standard Specification for Zinc Oxide Pigments
- Standard Test Methods for Sampling and Testing Dipentene
- Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
- Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
- Standard Specification for Red Lead Pigment
- Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
- Standard Test Method for Evaluating Degree of Settling of Paint
- Standard Practice for Evaluating Degree of Traffic Paint Line Wear
- Standard Specification for Aluminum Powder and Paste Pigments for Paints
- Standard Specification for Metallic Copper Powder for use in Antifouling Paints
- Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
- Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
- Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods
- Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
- Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
- Standard Guide for Listing Relevant Standards and Publications for Commercial Shipbuilding
- Standard for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
- Standard Test Method for Specific Bendability of Pipeline Coatings
- Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
- Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
- Standard Test Method for Chemical Resistance of Pipeline Coatings
- Standard Test Method for Evaluating Pipeline Coating Patch Materials
- Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
- Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
- Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
(Back to all Standards)