- SSPC-CS 23.00/AWS C2.23M/NACE No. 12, Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel

- SSPC-PS 10.01, Hot-Applied Coal Tar Enamel Painting System

- SSPC-PS 10.02, Cold-Applied Coal Tar Mastic Painting System

- SSPC-PS 11.01, Black (or Dark Red) Coal Tar Epoxy Polyamide Painting System

- SSPC-PS 12.01, One Coat Zinc-Rich Painting System

- SSPC-PS 13.01, Epoxy Polyamide Painting System

- SSPC-PS 16.01, Silicone Alkyd Painting System for New Steel

- SSPC-PS 24.00, Latex Painting System for Industrial and Marine Atmospheres, Performance-Based

- SSPC-PS 26.00, Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based Type I, for Use over Blast Cleaned Steel - Type II, for Use over Hand Cleaned Steel

- SSPC-PS COM, Commentary on Painting Systems

- SSPC-PS Guide 12.00, Guide to Zinc-Rich Coating Systems

- SSPC-PS Guide 15.00, Guide for Selecting Chlorinated Rubber Painting Systems

- SSPC-PS Guide 21.00, Guide for Selecting Painting Systems for Topsides

- SSPC-PS Guide 22.00, Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems

- SSPC-PS Guide 7.00, Guide for Selecting One-Coat Shop Painting Systems

- SSPC-PS Guide 8.00, Guide to Topcoating Zinc-Rich Primers