Paint and Coatings Industry Standards


AWWA (101)

Search Standards | Back to all Standards


Coagulation Chemicals (6)

- Aluminum Sulfate—Liquid, Ground, or Lump

- Liquid Sodium Silicate

- Sodium Aluminate

- Ferric Sulfate

- Liquid Ferric Chloride

- Liquid Polyaluminum Chloride


Concrete Pipe (5)

- Reinforced Concrete Pressure Pipe, Steel-Cylinder Type

- Prestressed Concrete Pressure Pipe, Steel-Cylinder Type

- Reinforced Concrete Pressure Pipe, Noncylinder Type

- Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type

- Design of Prestressed Concrete Cylinder Pipe


Disinfection Chemicals (4)

- Hypochlorites

- Liquid Chlorine

- Ammonium Sulfate

- Sodium Chlorite


Disinfection of Facilities (4)

- Disinfecting Water Mains

- Disinfection of Water-Storage Facilities

- Disinfection of Water Treatment Plants

- Disinfection of Wells


Ductile-Iron Pipe and Fittings (8)

- ANSI Standard for Cement-Mortar Lining for Ductile-Iron Pipe and Fittings for Water

- ANSI Standard for Polyethylene Encasement for Ductile-Iron Pipe Systems

- ANSI Standard for Ductile-Iron and Gray-Iron Fittings, 3 In. Through 48 In. (76 mm Through 1,219 mm), for Water

- ANSI Standard for Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings

- ANSI Standard for Flanged Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges

- ANSI Standard for Protective Fusion-Bonded Epoxy Coatings for the Interior and Exterior Surfaces of Ductile-Iron and Gray-Iron Fittings for Water Supply Service

- ANSI Standard for Thickness Design of Ductile-Iron Pipe

- ANSI Standard for Ductile-Iron Pipe, Centrifugally Cast, for Water


Filtration Media (2)

- Filtering Material

- Precoat Filter Media


Meters (8)

- Cold-Water Meters—Displacement Type, Bronze Main Case

- Cold-Water Meters—Compound Type

- Cold-Water Meters—Fire Service Type

- Propeller-Type Meters for Waterworks Applications

- Direct-Reading, Remote-Registration Systems for Cold-Water Meters

- Encoder-Type Remote-Registration Systems for Cold-Water Meters

- Cold-Water Meters—Multijet Type (Includes addendum C708a-98)

- Cold-Water Meters—Displacement Type, Plastic Main Case


Pipe Installation (5)

- Installation of Ductile-Iron Water Mains and Their Appurtenances

- Cement-Mortar Lining of Water Pipelines in Place—4 In. (100 mm) and Larger

- Underground Installation of Polyvinyl Chloride (PVC) Pressure Pipe and Fittings for Water

- Grooved and Shouldered Joints

- Installation of Steel Water Pipe--4 In. (100 mm) and Larger


Plant Equipment (2)

- Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders (Includes addendum F101a-97)

- Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets (Includes addendum F102a-97)


Plastic Pipe (7)

- Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution

- Polyethylene (PE) Pressure Pipe and Tubing, ½ In. (13 mm) Through 3 In. (76 mm), for Water Service

- Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 In. Through 48 In. (350 mm Through 1,200 mm), for Water Transmission and Distribution

- Polyethylene (PE) Pressure Pipe and Fittings, 4 In. (100 mm) Through 63 In. (1,575 mm), for Water Distribution

- Polyvinyl Chloride (PVC) Pressure Fittings for Water—4 In. Through 8 In. (100 mm Through 200 mm)

- Molecularly Oriented Polyvinyl Chloride (PVCO) Pressure Pipe, 4 In. Through 12 In. (100 mm Through 300 mm), for Water Distribution

- Fiberglass Pressure Pipe


Prophylaxis (3)

- Sodium Fluoride

- Sodium Fluorosilicate

- Fluorosilicic Acid


Scale and Corrosion Control Chemicals (8)

- Sodium Hydroxide (Caustic Soda)

- Sodium Polyphosphate, Glassy (Sodium Hexametaphosphate) (Includes addendum B502a-97)

- Sodium Tripolyphosphate (Includes addendum B503a-97)

- Monosodium Phosphate, Anhydrous (Includes addendum B504a-97)

- Disodium Phosphate, Anhydrous (Includes addendum B505a-97)

- Potassium Hydroxide (Includes addendum B511a-97)

- Sulfur Dioxide

- Calcium Chloride


Service Lines (1)

- Underground Service Line Valves and Fittings (Also Included: Collected Standards for Service Line Materials)


Softening Chemicals (3)

- Sodium Chloride

- Soda Ash

- Quicklime and Hydrated Lime (Includes addendum B202a-97)


Steel Pipe (13)

- Steel Water Pipe—6 In. (150 mm) and Larger

- Coal-Tar Protective Coatings and Linings for Steel Water Pipelines—Enamel and Tape—Hot-Applied (Includes addendum C203a-99)

- Cement-Mortar Protective Lining and Coating for Steel Water Pipe—4 In. (100 mm) and Larger—Shop Application

- Field Welding of Steel Water Pipe

- Steel Pipe Flanges for Waterworks Service—Sizes 4 In. Through 144 In. (100 mm Through 3,600 mm)

- Dimensions for Fabricated Steel Water Pipe Fittings

- Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipe

- Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines

- Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines

- Tape Coating Systems for the Exterior of Steel Water Pipelines

- Fabricated Steel Mechanical Slip-Type Expansion Joints

- Fusion-Bonded Polyethylene Coating for the Exterior of Steel Water Pipelines

- Polyurethane Coatings for the Interior and Exterior of Steel Water Pipe and Fittings


Storage (6)

- Factory-Coated Bolted Steel Tanks for Water Storage

- Automatically Controlled, Impressed-Current Cathodic Protection for the Interior of Steel Water Tanks

- Wire- and Strand-Wound, Circular, Prestressed Concrete Water Tanks (Includes addendum D110a-96)

- Circular Prestressed Concrete Water Tanks With Circumferential Tendons

- Thermosetting Fiberglass-Reinforced Plastic Tanks

- Flexible-Membrane-Lining and Floating-Cover Materials for Potable Water Storage


Taste and Odor Control (6)

- Powdered Activated Carbon

- Sodium Metabisulfite

- Copper Sulfate (Includes addendum B602a-97)

- Potassium Permanganate

- Granular Activated Carbon

- Reactivation of Granulated Activated


Valves and Hydrants (10)

- Metal-Seated Gate Valves for Water Supply Service (Includes addendum C500a-95)

- Dry-Barrel Fire Hydrants

- Wet-Barrel Fire Hydrants

- Rubber-Seated Butterfly Valves

- Ball Valves, 6 In. Through 48 In. (150 mm Through 1,200 mm)

- Swing-Check Valves for Waterworks Service, 2 In. (50 mm) Through 24 In.( 600 mm) NPS

- Resilient-Seated Gate Valves for Water Supply Service (Includes addendum C509a-95)

- Double Check Valve Backflow Prevention Assembly

- Reduced-Pressure Principle Backflow Prevention Assembly

- Pilot-Operated Control Valves


(Back to all Standards)