The Town of Seabrook is currently seeking contractors to rehabilitate two Water Department Water Tanks in Seabrook, New Hampshire.
Bids are due Feb. 12. A non-mandatory pre-bid meeting will be held today (Jan. 22).
Scope of Work
This project involves recoating the interior and exterior surfaces of an existing 720,000-gallon standpipe and recoating the exterior surfaces of an existing 1 million-gallon elevated water storage tank.
|
Town of Seabrook |
The Town of Seabrook is currently seeking contractors to rehabilitate two Water Department Water Tanks in Seabrook, New Hampshire.
|
Contractors will abrasive blast clean the interior wet surfaces to Near White standards (SSPC-SP10/NACE 2). The interior surfaces will then be coated with a zinc-rich primer and epoxy finish.
Interior dry surfaces will be spot power-tool cleaned to Bare Metal standards (SSPC-SP11) and coated with a zinc-rich primer and two-coat epoxy system.
The work also includes spot power-tool cleaning the exterior surfaces to Bare Metal standards (SSPC-SP11). The exterior metal surfaces will be coated with a zinc-rich primer, epoxy intermediate, polyurethane intermediate and fluoropolymer finish.
Metal piping surfaces will be abrasive blast cleaned to Near White standards (SSPC-SP10) and coated with a three-coat epoxy system.
The owner-approved coating manufacturers include Tnemec, Sherwin-Williams, PPG or an approved equal.
Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try PaintBidTracker free!
|