Paint and Coatings Industry News

Main News Page


NYC Seeks Contractors for Bridge Work

Wednesday, January 16, 2019

| More

New York City is seeking contractors for rehabilitation of approaches and towers on the Brooklyn Bridge located in the boroughs of Manhattan and Brooklyn.

Bids are due Feb. 7.

Scope of Work:

This project involves rehabilitation of the approaches and Brooklyn Bridge approach arches, towers and other miscellaneous rehabilitation.

The contractor will oversee 3,000 square feet of shop prime and field coating structural steel with City of New York System A and 55,000 square feet of total coating replacement on structural steel members utilizing City of New York System B. Both systems will require abrasive blast-cleaning to Near White (SSPC-SP 10) and coating with an organic zinc primer, epoxy intermediate and urethane finish coating.

Giuseppe Milo / Flickr

New York City is seeking contractors for rehabilitation of approaches and towers on the Brooklyn Bridge located in the boroughs of Manhattan and Brooklyn.

The contractor will also conduct 72,000 square feet of total coating of galvanized steel members using City of New York System N, which includes cleaning and spot coating with an epoxy zinc primer, a full coat of epoxy intermediate and a full coating of a polysiloxane finish.

Fasteners will receive solvent cleaning and power wire brush cleaning and coating with City of New York System A. Water washing of cables is also required.

Contractors will oversee 26,750 square feet of application of a two-coat protective sealing of structural concrete. Concrete surfaces will require abrasive or shot blast-cleaning followed by vacuum cleaning before sealant application. The project also includes 1,000 square yards of winter surface treatment of substructure slabs and structural approach slabs.

The project also includes a lump sum item for removal and replacement of the membrane system at tower access hatches and 11,250 square feet of spray-applied waterproofing membrane application.

Contractors will perform removal of lead-based paint from brick masonry surfaces. The project stipulates 26,000 square feet of cleaning granite approach surfaces and 252,500 square feet of cleaning granite towers. Granite and masonry surfaces will be cleaned with commercially available masonry cleaners. The owner-approved manufacturers include ProSoCo Sure Klean, Diedrich Technologies, Chemique Inc. and Shore Chemical Company.

Containment and disposal of 9,049 pounds of contaminated hazardous solid materials and 229 gallons of contaminated liquid materials is required. The contract also includes lump sum items for furnishing a containment system.

Certification to SSPC-QP1, QP2 and QP3 is required.

Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Visit us on Facebook!