Paint BidTracker

(800) 837-8303

The Technology Publishing Network
JPCL | PaintSquare | Durability + Design Paint BidTracker

Sign-up for a Free Trial...or Login
Email/Username* Password*
Switch the New PaintBidtracker 360
Follow us on Twitter  |   Join us on Facebook
About Paint BidTracker | Contact Us | Advertise | Search

Paint and Coatings Industry News

Main News Page

1.5MG Tank Rehab Out for Bid in MD

Thursday, February 23, 2017

Comment | More

Anne Arundel County is seeking contractors for the rehabilitation of the existing 1.5 million gallon Linthicum storage tank, located in Annapolis, Maryland.

Bids are due March 14. The cost of work is estimated between $1,500,000 and $2,000,000.

Scope of Work

This project involves rehabilitating an existing 146-foot-high by 100-foot-wide toro-pillar elevated water storage tank.

The wet interior of the steel storage tank will be abrasive blast-cleaned to White Metal (SSPC-SP 5) standards and coated with a three-coat epoxy system. The dry interior will be power-tool cleaned to White Metal (SSPC-SP 11) standards and coated with a three-coat zinc-epoxy system.

Linthicum storage tank
Anne Arundel County

Anne Arundel County is seeking contractors for the rehabilitation of the existing 1.5 million gallon Linthicum storage tank, located in Annapolis, Maryland.

The tank’s exterior surfaces will be abrasive blast-cleaned to a Near-White (SSPC-SP 10) standard and coated with a prime coat of a modified aromatic polyurethane, an intermediate coat of an aliphatic acrylic polyurethane, and a finish coat of advanced thermoset fluoropolymer.

‎The contractor will also abrasive blast-clean to Commercial (SSPC-SP 6) standards and coat ductile iron piping with a modified polyamidoamine epoxy system.

All interior horizontal, vertical, and overhead concrete will be abrasive blast-cleaned to SSPC-SP 13 standards or high-pressure washed prior to applying an epoxy resin binder and coating system.

The owner has specified that coating materials be manufactured by Tnemec, however, the contractor may substitute equivalent products by approved manufacturers such as Sherwin-Williams or Carboline.

Containment according to SSPC-Guide 6 will be required, as lead is present in some of the existing coatings.

Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try PaintBidTracker free!


Tagged categories: Bidding; Contract awards; contract painting leads; Government; Government contracts; Jobs; Paint BidTracker

Comment Join the Conversation:

Sign in to our community to add your comments.

Lower Cost, Long-Term Asset Protection

Designed for long-term protection in highly corrosive environments, Sherwin-Williams’ Sher-Loxane™ 800 High-Performance Polysiloxane coating delivers a high-gloss finish in just two coats – reducing total operational costs for a better bottom line.

Clemco Industries Corp.
Maximum Dust Suppression Systems Start at $14,950

The system comprises proven technology and equipment with user-friendly flexibility in mind. See it in action.

Technology Publishing

The Technology Publishing Network

Durability + Design PaintSquare the Journal of Protective Coatings & Linings Paint BidTracker

USE Paint BidTracker:      Get a Free Trial
EXPLORE Paint BidTracker:      Project Showcase   |   Blogs   |   Social   |   News   |   Webinars   |   White Papers   |   Links   |   Standards   |   Classifieds
KNOW Paint BidTracker:      FAQ   |   About Paint BidTracker   |   Privacy policy   |   Terms & conditions   |   Site Map   |   Search   |   Contact Us

© Copyright 2000 - 2018, Technology Publishing, Co., All rights reserved
1501 Reedsdale Street, Suite 2008, Pittsburgh, PA 15233; Tel 1-412-431-8300; Fax 1-412-431-5428; E-mail