|
Multnomah County has awarded Southern Road & Bridge, LLC of Tarpon Springs, Florida, a $18,243,776.70 project for painting the main spans of the Willamette River Bridge in Portland, Oregon.
Southern Road & Bridge, LLC was the lowest of six apparent bidders. Additional bidders included:
-
F.D.Thomas, Inc. of Sacramento, California, in the amount of $14,491,445.85;
-
Thomas Champion JV, LLC of Pevely, Missouri, in the amount of $19,091,635.75;
-
Vimas Painting Company, Inc. of Campbell, Ohio, in the amount of $21,742,882.00;
-
Abhe & Svoboda of Alpine, California, in the amount of $21,947,649.50; and
-
S&K Painting, Inc. of Clackamas, Oregon, in the amount of $26,063,855.00.
The originally reported amount by F.D. Thomas of $24,444,440 was submitted in error, and a later issued corrected amount of $14,491,445.85 was reported.
The project bid June 15.
Scope of Work
The awarded contractor will oversee rehabilitation of the Willamette River (Morrison) Bridge located in Portland, Oregon. The contract includes the rehabilitation and painting of Span 1, 2 West, 2 East, and Span 3. Drainage rehabilitation and sidewalk replacement is also included. The structure is listed on the National Register of Historic Places.
 |
|
Raymonst, CC-BY-SA-3.0, via Wikimedia Commons |
|
Multnomah County has awarded Southern Road & Bridge, LLC of Tarpon Springs, Florida, a $18,243,776.70 project for painting the main spans of the Willamette River Bridge in Portland, Oregon.
|
The project involves preparation and coating all new and existing structural steel according to the State of Oregon Special Profision 00594. New steel will be abrasive blast-cleaned to Near White standards (SSPC-SP 10/NACE No. 2) with the final appearance closely approximating Pictorial Standard SP 10 of SSPC-Vis 1.
Existing steel structures will require Near White Metal Blast-Cleaning (SSPC-SP 10/NACE No. 1) or cleaned to Very Thorough waterjetting standards (SSPC- WJ-2) with the appearance approximate to Pictorial Standard WJ-2 of SSPC-Vis 4. For coated steel structures requiring rehabilitation, steel surfaces will require Commercial Grade Power Tool Cleaning (SSPC-SP 15).
For steel requiring shop coating, a three-coat organic or inorganic zinc-rich system is required. Maintenance coating of steel or iron surfaces will require a three-coat organic zinc-rich system. Steel and iron surfaces receiving field application of coatings will receive a three-coat surface tolerant zinc-rich system. The owner-approved coating manufactures are Sherwin-Williams, Carboline and Wasser.
The project includes lead abatement. Containment is required.
Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Visit us on Facebook!
|
