|
The City of New York is seeking contractors to perform preventive maintenance on the Brooklyn, Manhattan, Williamsburg and Queensboro bridges, located in New York, New York.
Bids are due Sept. 28.
Scope of Work:
The project will involve performing maintenance and cleaning on the Brooklyn, Manhattan, Williamsburg and Queensboro bridges.
 |
|
Postdlf, CC BY-SA 3.0, via Wikimedia Commons |
|
The City of New York is seeking contractors to perform preventive maintenance on the Brooklyn, Manhattan, Williamsburg and Queensboro bridges, located in New York, New York.
|
The contract includes a combined 50,000 square feet of spray-applied waterproofing membrane application across all bridge structures. Areas to receive waterproofing will first require abrasive blast-cleaning and application of a primer to substrate surfaces.
Contractors will oversee 21,000 square feet of overcoating across all bridge structures using Paint System B. The steel will be abrasive blast-cleaned to Near White standards (SSPC-SP 10) followed by application of a spot epoxy zinc-rich primer, epoxy penetrating sealer, epoxy intermediate and urethane finish coating. The owner-approved manufacturers are Ameron, Carboline, ICI Devoe, MAB and Sherwin-Williams. Containment, treatment and disposal of coatings is required.
All bridges will receive three cycles of maintenance cleaning and pressure-washing.
Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Visit us on Facebook!
|
